AMERICAN BUILT. PROJECT READY.MANUFACTURER DIRECT (951) 403-5738
Three gray switchgear cabinets on wooden pallets in a warehouse.

FAQ / VIRGINIA & NATIONWIDE

Does UL 891 Apply to Medium Voltage?

New American-built power distribution equipment, engineered around your project.

ENGINEERED FOR POWER
US
Made in the USAAmerican components
✓
Project-specific standardsConfirmed for equipment type
↗
Built to moveLead time quoted by project

FAQ / MANUFACTURER DIRECT

For medium-voltage equipment, do not assume a low-voltage switchboard standard defines the product’s requirements. The correct basis depends on the equipment type, voltage class, intended use, project specifications, and applicable engineering decisions. Switchgear Builder Virginia manufactures new, custom switchgear with direct USA manufacturing, all-American components, short lead times, and nationwide shipping. Ratings, schedules, and compliance details are subject to quote and verification.

Start With Voltage Class

A standard written for low-voltage switchboards should not be treated as a blanket standard for medium- or high-voltage switchgear. These are different equipment categories, and the applicable requirements depend on what the assembly is designed to do and how it will be used. Buyers should identify the nominal system voltage, the equipment’s function, and the project’s design basis before comparing proposals. A familiar standard name on a specification does not by itself establish suitability for medium-voltage equipment. Instead, ask the project engineer to identify the governing standards, required ratings, and any inspection or approval criteria for the specific application. This distinction matters when preparing bid documents, reviewing submittals, and coordinating with other electrical equipment. Clear requirements help prevent a low-voltage designation from being mistakenly applied to medium-voltage gear, while leaving final interpretation with the engineer responsible for the project.

Define the Equipment

The term “switchgear” can describe assemblies with different voltage classes, switching functions, protective devices, and construction. Before requesting a quote, clarify whether the project calls for medium-voltage distribution equipment, a low-voltage switchboard, or a coordinated lineup containing distinct equipment sections. Include the system voltage and operating arrangement, such as incoming source, feeders, bus configuration, and intended connections, as established by the project engineer. Also identify indoor or outdoor installation, available fault information, environmental conditions, and interface requirements where known. These details are not interchangeable: they can affect enclosure selection, component choices, ratings, dimensions, and the documentation required for review. If the project documents use “switchgear” broadly, ask the engineer to resolve the intended equipment category rather than relying on a label alone. A precise description gives the manufacturer a sound basis to develop a proposal and flag information that still needs verification.

Ask the Engineer

The engineer of record or other responsible design professional should establish which standards and codes apply to the medium-voltage installation. That review should account for the equipment’s function, system conditions, project jurisdiction, utility or owner criteria when relevant, and the adopted project documents. Ask for the required voltage class, continuous-current rating, short-circuit or withstand requirements, insulation requirements, switching and protection functions, and any required testing, inspection, or third-party evaluation. Do not infer these values from a product description or from a standard intended for another equipment class. If specifications conflict or use unclear terminology, request written clarification before finalizing a purchase. The manufacturer can review the stated scope and identify information needed to quote a custom build, but the project engineer must confirm the design basis and acceptance criteria. This division of responsibility keeps technical decisions tied to the installation rather than to assumptions about a label.

Review Ratings and Submittals

Once the design basis is established, compare each proposal and submittal against the project’s actual requirements. Check that equipment voltage class, current ratings, interrupting or withstand capabilities, protective devices, construction, and connection details are stated clearly and correspond to the application. Confirm which items are included, which are options, and which remain subject to engineering review or verification. Request documentation describing applicable tests, inspections, approvals, or listings rather than assuming they apply to every configuration. A rating number alone does not prove that an assembly meets a project’s complete requirements. For custom equipment, drawings and schedules should be reviewed for dimensions, cable entry, access, interfaces, and coordination with adjacent systems. If a requirement is absent from the quote or submittal, resolve it before approval. Switchgear Builder Virginia can provide a quote for new custom equipment based on confirmed project requirements; final ratings and schedules remain subject to verification.

Plan the Purchase

A practical procurement package gives the manufacturer enough information to identify the equipment category and evaluate the requested scope without treating unconfirmed details as settled. Provide the engineer-approved specification, one-line diagram, applicable schedules, site constraints, and requested documentation when available. If any item is preliminary, label it clearly and identify who will confirm it and when. Ask early about drawing review, required customer decisions, shipping coordination, and the information needed to establish a schedule; timing depends on the quoted configuration and confirmed requirements, so avoid relying on an assumed delivery date. Switchgear Builder Virginia manufactures and supplies new switchgear, with direct USA manufacturing, all-American components, custom builds, short lead times, and nationwide shipping. These company capabilities do not replace project-specific engineering review. Before release, align the approved submittal, purchase scope, and installation requirements so the delivered equipment can be evaluated against the intended design basis.

Related project guides

START A CONVERSATION

Let’s build the right solution.

Tell us what you’re building, replacing or upgrading. Share the information you have now; project details and availability can be confirmed together.

PREFER TO TALK?

(951) 403-5738

Virginia projects. Nationwide delivery.

This attempts to open a draft in your configured email app; review and send it there. Browser support varies. For immediate assistance, call (951) 403-5738.

Request a quote