AMERICAN BUILT. PROJECT READY.MANUFACTURER DIRECT (951) 403-5738
Tall switchgear cabinets on pallets, with a panel door open.

PRODUCTS / VIRGINIA & NATIONWIDE

Service Entrance Switchboards

New American-built power distribution equipment, engineered around your project.

ENGINEERED FOR POWER
US
Made in the USAAmerican components
✓
UL 891 assembliesFor applicable switchboards
↗
Built to moveLead time quoted by project

PRODUCTS / MANUFACTURER DIRECT

Service entrance switchboards coordinate the building’s incoming electrical service with metering, disconnecting, grounding, and downstream distribution. The right arrangement depends on the serving utility’s rules, the authority having jurisdiction (AHJ), the service characteristics, and the project’s operating needs. Switchgear Builder Virginia manufactures new, custom-built switchboards in the USA using all-American components, with nationwide shipping. For applicable low-voltage switchboards, UL 891 assemblies may be specified; the proposed assembly and its ratings must be confirmed for the project. Share the utility requirements, drawings, and load information so the service arrangement can be evaluated and quoted.

Service Disconnect Arrangement

The service disconnect arrangement determines how incoming power can be isolated and how the service is divided among downstream equipment. Buyers should confirm the required number and type of disconnects, their ampere ratings, available fault-current conditions, and how feeders will leave the switchboard. These details affect compartment layout, bus configuration, space, and coordination with the distribution system. A single main or multiple service disconnects may be considered only where the utility, project design, and applicable requirements permit the chosen arrangement. Do not select a configuration from a generic diagram alone: the one-line, equipment schedule, and service conditions need to agree. Switchgear Builder Virginia can custom-build new low-voltage switchboards around project requirements. Proposed ratings and construction details remain subject to engineering review and verification in the quotation; they should not be inferred from a product description or nominal service voltage.

Utility Metering Interface

Metering requirements are utility-specific, so establish the interface before finalizing the switchboard layout. Confirm whether the utility requires instrument transformers, a particular meter compartment, designated access, specified conduit entry, or a separate metering enclosure. Also clarify which party supplies and installs the meter and related equipment; those responsibilities vary by project and should be documented rather than assumed. Physical details matter: compartment location, dimensions, barriers, wiring space, and access can affect both the utility’s review and the equipment footprint. Provide the utility’s current service requirements and any approved metering drawings for coordination. A switchboard can be configured to accommodate verified requirements, but that does not itself constitute utility approval. Buyers should resolve questions with the serving utility and design team early, then carry the confirmed interface into the equipment documents. Final arrangement, ratings, and schedule are subject to quote and verification.

Grounding and Bonding

Grounding and bonding details must match the service design and the project’s applicable requirements. During design review, clarify where the service neutral is bonded, how equipment grounding connections are arranged, and how grounding conductors enter and connect to the switchboard. These decisions influence bus provisions, terminal space, enclosure layout, and coordination with downstream panels or distribution equipment. Avoid assuming that a familiar arrangement fits every installation: service configuration, system voltage, utility rules, and the engineered one-line all matter. Provide the project grounding details and any relevant drawings so the proposed equipment can be checked against them. Installation and field connections should be handled by qualified personnel under approved project documents, not improvised from general product copy. Where a particular lug, bus, or other feature is required, identify it in the specification and verify that it is included in the quoted build.

Utility and AHJ Review

The serving utility and local authority having jurisdiction can have different review roles. The utility may set service and metering interface conditions, while the AHJ reviews matters within its authority. Requirements can depend on the project location and application, so confirm them directly rather than relying on another site’s accepted arrangement. Before equipment release, reconcile utility comments, permit documents, electrical drawings, and equipment submittals. Check service entrance labeling, disconnect identification, access provisions, and any requested barriers or compartments against the approved project documents. If reviews are incomplete, list open items and identify who will resolve each one; unresolved interface details can lead to drawing changes or field coordination issues. Switchgear Builder Virginia can prepare a custom new switchboard to verified project requirements, but utility acceptance, AHJ approval, and any inspection outcome must be established by the responsible parties. Do not treat a quotation as an approval.

Specify the Switchboard

For a useful quotation, provide the service voltage and phase, main and branch device requirements, estimated or specified load, available fault-current information, one-line diagram, metering criteria, grounding details, and utility or AHJ comments. Include indoor or outdoor application, incoming and outgoing cable direction, access constraints, and space limitations where known. These inputs help reviewers identify conflicts between the electrical arrangement and the available footprint before the build is finalized. Ask which ratings, components, barriers, metering provisions, and documents are included in the proposed scope; features should be treated as requirements to verify, not assumed options. Applicable low-voltage switchboards may be offered as UL 891 assemblies, subject to confirmation of the exact assembly and project requirements. Switchgear Builder Virginia manufactures new custom equipment in the USA and ships nationwide. Lead times, ratings, and configuration depend on the reviewed scope and are confirmed through quotation—not promised from the brief alone.

Related project guides

START A CONVERSATION

Let’s build the right solution.

Tell us what you’re building, replacing or upgrading. Share the information you have now; project details and availability can be confirmed together.

PREFER TO TALK?

(951) 403-5738

Virginia projects. Nationwide delivery.

This attempts to open a draft in your configured email app; review and send it there. Browser support varies. For immediate assistance, call (951) 403-5738.

Request a quote