GLOSSARY / MANUFACTURER DIRECT
An interlock is a feature that limits which operating actions can happen, or which equipment states can coexist. In switchgear, its purpose depends on the equipment and system design: it may block an incompatible operation, enforce a sequence, or require a particular condition before an action is permitted. “Interlock” does not name one universal mechanism or protection level. Understanding whether a design uses mechanical, key, or electrical interlocking helps buyers ask clearer questions about operation, failure modes, and project requirements.
What an interlock does
An interlock is an arrangement that prevents, restricts, or sequences an operation unless specified conditions are met. For example, a design might prevent two switching devices from being closed at the same time, or prevent access to a compartment until a device reaches a required position. The actual purpose depends on the one-line diagram, equipment arrangement, operating procedure, and specified design. An interlock is not, by itself, proof that equipment is de-energized, safe to touch, or protected against every possible error. Buyers should identify the exact action being controlled and the condition that permits it. They should also ask what happens if a component is damaged, misadjusted, or unavailable. That discussion helps distinguish a useful operating constraint from a broader safety assumption. For new switchgear, the intended sequence should be documented and reviewed with the project team before the equipment configuration is finalized.
Mechanical interlocks
A mechanical interlock uses physical parts, such as linkages, blockers, or a mechanism tied to a device position, to restrict movement or operation. Because the constraint is embodied in the hardware, it may not depend on a control-power signal to perform its specific blocking function. That does not make every mechanical arrangement fail-safe or maintenance-free: wear, adjustment, damage, and the chosen mechanism matter. Buyers should ask which devices and positions are mechanically linked, what action is blocked, and whether the design allows the intended maintenance and operating sequence. Confirm that the interlock is compatible with the selected breaker or switch construction and the required arrangement. A mechanical feature also does not replace operating procedures or establish that equipment is de-energized. When comparing proposals, request a clear description or drawing of the interlock’s purpose rather than relying on a generic feature label.
Key interlocks
A key interlock uses controlled key movement to enforce a sequence. In a typical arrangement, a key becomes available only when a device or mechanism reaches a defined state; that key can then release another lock or permit the next step. The sequence is determined by the selected locks, keying plan, and equipment design, not by the word “key” alone. Buyers should map each step, identify who controls and stores keys, and consider how maintenance, emergency procedures, and authorized alternate operations will be handled. A missing, damaged, or incorrectly managed key can affect the intended sequence, so procedures matter alongside hardware. Confirm whether the proposed arrangement is intended to restrict access, prevent a particular switching combination, or coordinate equipment across locations. Ask for the key sequence and operating assumptions during design review; do not assume that every key system provides the same restriction or supervision.
Electrical interlocks
An electrical interlock uses electrical control logic or circuit connections to permit or inhibit an operation based on selected signals or device states. Depending on the design, the logic may involve auxiliary contacts, control wiring, relays, or other specified components. The buyer should ask which inputs the interlock monitors, what output or operation it controls, and what behavior is intended if control power or a signal is lost. Those details matter because electrical interlocking depends on the implemented circuit and its assumptions; a label alone does not reveal how faults are handled. Review the schematic and sequence with the controls and electrical teams, including any interfaces with external equipment. Confirm what indication an operator receives when an action is blocked. Electrical interlocks can coordinate complex sequences, but they do not automatically replace mechanical provisions, written procedures, or other project-specific safeguards.
Specify the intended sequence
When specifying an interlock, describe the prohibited operation or required sequence in plain terms, then identify the equipment involved and the operating states that matter. Provide the one-line diagram, control requirements, and any project-specific operating procedures available for design review. Ask the manufacturer to state the interlock type, its limits, required control power or key management, and how the intended operation is represented in drawings. Verify compatibility with the selected equipment and confirm responsibilities for external wiring or interfaces. Do not treat an interlock as a substitute for approved procedures, training, or verification of equipment condition. Switchgear Builder Virginia manufactures new custom switchgear, with schedules and configurations subject to quote and verification. Clear requirements help the design team assess whether a mechanical, key, electrical, or combined approach fits the project; the final arrangement should be reviewed by qualified project professionals.
