AMERICAN BUILT. PROJECT READY.MANUFACTURER DIRECT (951) 403-5738
Switchgear cabinets loaded onto a flatbed truck outdoors.

RATINGS / VIRGINIA & NATIONWIDE

Enclosure Environmental Ratings

New American-built power distribution equipment, engineered around your project.

ENGINEERED FOR POWER
US
Made in the USAAmerican components
✓
Project-specific standardsConfirmed for equipment type
↗
Built to moveLead time quoted by project

RATINGS / MANUFACTURER DIRECT

An enclosure designation is a starting point for matching switchgear to its surroundings, not a substitute for reviewing the full installation. Indoor and outdoor exposure, dust, water, corrosive substances, temperature, and heat removal can all affect the selection. Switchgear Builder Virginia builds new custom switchgear in the USA with all-American components and ships nationwide. For a project, compare the requested enclosure designation with the actual site conditions, equipment configuration, and applicable requirements. Final suitability, ratings, and schedule must be confirmed for the specific build.

Start with the Site

Describe where the equipment will sit and what it may encounter before selecting an enclosure. A clean, conditioned electrical room presents different concerns from a location exposed to wind-driven rain, washdown, dust, or airborne contaminants. Note whether the switchgear is indoors or outdoors, whether doors may be opened during routine access, and whether water can collect near the installation. Consider nearby processes, cleaning practices, temperature swings, and the path for moving equipment into place. A designation that addresses one exposure does not automatically resolve every site concern, and an outdoor location alone does not define all the conditions. Give the manufacturer the expected environment and the project documents, then verify that the proposed enclosure and arrangement address them. This early review can prevent a mismatch between the equipment package and the room, pad, or operating conditions it must fit.

Understand the Designation

Enclosure designations communicate defined protection characteristics, but buyers should not treat a label as a general promise that equipment will withstand every environmental hazard. Confirm which standard and designation the project specification calls for, what the stated protection covers, and whether the proposed configuration has been evaluated for that use. Check doors, covers, cable entry points, ventilation openings, and accessory arrangements rather than relying on a designation viewed without context. The same broad category can still involve meaningful differences in construction and intended application. Also distinguish enclosure protection from electrical ratings, internal arc performance, corrosion resistance, or suitability for a particular room; one does not establish the others. If project documents use terminology that is incomplete or unclear, resolve it with the engineer, owner, and manufacturer before ordering. The selected description should match the actual build and its documented scope.

Water, Dust, and Corrosion

Identify the likely source and severity of water or particulate exposure rather than assuming that “sealed” means protected from every condition. Rain, splashing, hose-directed water, condensation, and flooding are different concerns, and the relevant designation may address only some of them. Dust or process residue can affect openings, surfaces, and maintenance needs. Corrosive atmospheres also require a separate discussion: ask what substances are present, how often exposure occurs, and whether cleaning agents or salt-bearing moisture are involved. Materials, finishes, hardware, and design details may be considered as project options, but their suitability and availability must be verified for the specific assembly. Avoid specifying a corrosion-resistant construction solely from a broad location label. Share known contaminants and cleaning methods with the project team, then confirm the proposed protection and maintenance assumptions in the submittal. Site conditions that are uncertain should be treated as items to resolve, not silently assumed away.

Ventilation and Heat

More protection from dust or water can constrain how heat leaves an enclosure, so environmental selection should be reviewed alongside the electrical design and operating conditions. Ask how the proposed arrangement manages heat from the equipment under the expected loading and ambient temperature. Openings, filters, fans, or other ventilation features may affect exposure protection and may require additional maintenance; do not assume they can be added without changing the enclosure evaluation. Conversely, a more closed design should not be taken as proof that internal temperatures will remain acceptable. The switchgear configuration, heat-producing components, duty, and room conditions all matter. Have the responsible design team verify thermal assumptions and identify any limits or maintenance steps associated with the selected arrangement. If the load profile or room temperature is not settled, document that uncertainty and verify the enclosure choice against the final project information before release.

Verify Before Ordering

Use the specification, drawings, site information, and equipment submittal together to confirm the enclosure designation and any associated options. Review dimensions, access clearances, cable entries, foundation or mounting needs, ventilation provisions, and the route from delivery point to final location. Confirm that the designation applies to the supplied configuration, including doors, openings, and accessories, rather than assuming that a general product description settles the question. For applicable low-voltage switchboards, UL 891 assemblies may be considered where required; this does not establish an environmental rating or apply to medium- or high-voltage switchgear. Switchgear Builder Virginia can discuss custom new-build requirements, with ratings, configuration, and schedule subject to quote and verification. Nationwide shipping is available, but it does not determine whether the destination site is suitable. Resolve open environmental questions with the project’s qualified design professionals before approving the equipment package.

Related project guides

START A CONVERSATION

Let’s build the right solution.

Tell us what you’re building, replacing or upgrading. Share the information you have now; project details and availability can be confirmed together.

PREFER TO TALK?

(951) 403-5738

Virginia projects. Nationwide delivery.

This attempts to open a draft in your configured email app; review and send it there. Browser support varies. For immediate assistance, call (951) 403-5738.

Request a quote