AMERICAN BUILT. PROJECT READY.MANUFACTURER DIRECT (951) 403-5738
Switchgear cabinets loaded onto a flatbed truck outdoors.

PRODUCTS / VIRGINIA & NATIONWIDE

Fusible Switchboards

New American-built power distribution equipment, engineered around your project.

ENGINEERED FOR POWER
US
Made in the USAAmerican components
✓
UL 891 assembliesFor applicable switchboards
↗
Built to moveLead time quoted by project

PRODUCTS / MANUFACTURER DIRECT

Fusible switchboards use fuses to interrupt overcurrent, with device selection shaped by system voltage, available fault current, load characteristics, and maintenance preferences. For buyers comparing a fused main, fused feeders, or a combination, the key is not simply choosing a fuse ampere rating: the switchboard and protective devices must be evaluated together for their intended application. Switchgear Builder Virginia manufactures new custom switchboards in the USA using all-American components, with nationwide shipping and short lead times subject to quote and verification. UL 891 assemblies are available where applicable. Confirm project requirements, equipment ratings, and access needs during specification and quotation.

Main and feeder arrangement

A fusible switchboard may use a fused service main, fused feeder switches, or both, depending on the distribution plan and project requirements. A fused main can provide a clear upstream overcurrent device, while fused feeders let each outgoing circuit have its own protective device. The arrangement affects equipment width, conductor routing, available spaces, and how the system is isolated for maintenance. Buyers should provide the one-line diagram, source details, feeder count, load information, and any required future provisions before layout is finalized. Also identify whether the project requires a main disconnect, particular switching functions, or a specified enclosure arrangement. These are design inputs, not assumed features. Switchgear Builder Virginia can develop a custom new switchboard to quoted requirements; device types, sections, bus details, and ratings remain subject to engineering review and verification.

Fuse class and selection

Fuse class matters because it identifies a device family with defined physical and performance characteristics; it is not interchangeable shorthand for ampacity alone. The selected fuse must be compatible with its switch or fuse holder and appropriate for the circuit voltage, expected current, and protection objective. Buyers should identify any specified fuse class, manufacturer constraints, and equipment interface requirements in the project documents. If those details are undecided, the design team can evaluate options against the actual system data rather than assume a class from a familiar catalog or an existing installation. Fuse ampere rating, time-current behavior, and the loads being served also affect whether a choice is suitable. Confirm the proposed fuse and switch combination, including applicable ratings, against approved submittals before procurement. Final selections are subject to quote and verification.

Interrupting duty and ratings

Interrupting duty is a system-level selection issue: the protective device must be suitable for the fault current available where it is installed, and the assembled switchboard must meet applicable project requirements. Do not infer adequate interrupting capability from a fuse class, ampere rating, or a number on a separate component. Provide the source transformer or utility information, system voltage, grounding arrangement, and a current short-circuit study when available. These inputs help the design team evaluate the intended application and identify ratings that need confirmation. Buyers should review the complete assembly documentation and verify device and bus ratings with the responsible electrical design professional before release. Where a study is incomplete or source conditions may change, resolve those assumptions rather than treating an unverified figure as final. Proposed ratings require quotation and verification.

Selective coordination

Selective coordination concerns how upstream and downstream protective devices respond to a fault, with the goal of limiting an interruption to the affected portion of the system where the design criteria require it. Fuse selection can influence that behavior, but simply specifying fuses does not establish coordination. Evaluation depends on the actual fuse types and ratings, system fault-current range, circuit configuration, and applicable project criteria. Provide the study requirements and available coordination or short-circuit documentation early, especially for facilities where continuity of service is important. The engineer of record should determine whether the proposed device combinations satisfy the project’s coordination objectives and applicable requirements. A switchboard manufacturer can use verified design inputs when configuring equipment, but should not substitute an assumed coordination claim for project-specific analysis. Confirm the final selections and documentation before approval.

Replacement and service access

Fuse replacement access deserves attention during layout, not after the switchboard is installed. Consider working clearance, door or barrier arrangement, the space needed to handle the specified fuse, and whether adjacent wiring or equipment could obstruct the intended maintenance procedure. The installation environment and applicable project requirements determine what clearances and access provisions are needed; do not rely on a generic dimension without checking the approved design. Buyers should identify who will maintain the equipment, any required isolation or interlocking features, and constraints imposed by the electrical room. Fuse replacement and inspection should follow the equipment documentation and site safety procedures, with work performed by qualified personnel under applicable rules. Switchgear Builder Virginia can account for stated access requirements in a custom new assembly. Confirm the final arrangement, device compatibility, and ratings in approved submittals.

Related project guides

START A CONVERSATION

Let’s build the right solution.

Tell us what you’re building, replacing or upgrading. Share the information you have now; project details and availability can be confirmed together.

PREFER TO TALK?

(951) 403-5738

Virginia projects. Nationwide delivery.

This attempts to open a draft in your configured email app; review and send it there. Browser support varies. For immediate assistance, call (951) 403-5738.

Request a quote