AMERICAN BUILT. PROJECT READY.MANUFACTURER DIRECT (951) 403-5738
Gray switchgear with meters and circuit breakers inside an open enclosure.

PRODUCTS / VIRGINIA & NATIONWIDE

Outdoor Switchboards

New American-built power distribution equipment, engineered around your project.

ENGINEERED FOR POWER
US
Made in the USAAmerican components
✓
UL 891 assembliesFor applicable switchboards
↗
Built to moveLead time quoted by project

PRODUCTS / MANUFACTURER DIRECT

Outdoor switchboards must be selected for the conditions around the equipment, not simply because an enclosure is labeled for outdoor use. Weather exposure, condensation, mounting details, working access, and the project’s electrical requirements all affect the specification. Switchgear Builder Virginia manufactures new, custom switchboards in the USA using all-American components, with nationwide shipping. Enclosure details, assembly configuration, ratings, and schedule are subject to project review and quote. Use the considerations below to identify what the design team should verify before ordering.

Match the enclosure to exposure

Start with the actual installation environment: direct rain, wind-driven moisture, sunlight, blowing dust, coastal air, washdown, or nearby processes can create different enclosure demands. An outdoor designation alone does not establish that a particular enclosure is suitable for every site. The project specification should identify the expected exposure and any required enclosure rating, materials, finish, openings, and access features. Confirm those requirements against the applicable equipment documentation and the complete assembly configuration. Consider what may reach the switchboard from above, below, or through adjacent work, including roof runoff, irrigation, road spray, and construction activity. Also account for later changes to the site, such as landscaping or added equipment that could direct water or restrict access. Switchgear Builder Virginia can review stated project requirements when preparing a custom new switchboard quotation; final suitability depends on verified specifications and site conditions.

Plan for condensation

Outdoor equipment can experience temperature swings that encourage moisture to form inside an enclosure, even when rain is kept out. Discuss the site’s daily and seasonal temperature range, humidity, shade, ventilation, and periods when equipment may be de-energized. Depending on the design requirements, options such as space heaters, thermostatic controls, drainage provisions, or other moisture-management measures may merit evaluation. These are not automatic features: their suitability, power source, control method, placement, and maintenance needs should be reviewed for the specific assembly. Avoid assuming that sealing an enclosure alone resolves condensation, or that adding ventilation is appropriate where it could admit contaminants. Ask the project engineer and equipment supplier to coordinate enclosure construction with the selected moisture strategy. Document which options are required in the quotation so the delivered configuration can be checked against the approved submittal.

Coordinate the foundation

The foundation is part of the installation decision, not an afterthought. Confirm the switchboard’s planned footprint, mounting method, entry direction for conductors, and relationship to finished grade before the concrete or supporting structure is finalized. The design team should establish how water will drain away from the equipment and whether the proposed elevation and pad details suit the exposure and project requirements. Check anchor locations, conduit stub-ups, clearances, and any access needed for installation against the final equipment drawings; do not rely on a preliminary outline when dimensions or arrangements may change. Also coordinate structural support and seismic or other project-specific requirements with the responsible professionals. Foundation interfaces can affect enclosure openings, cable routing, and service access, so resolve them during submittal review. The switchboard configuration and interface details should be confirmed in the approved project documents before construction proceeds.

Preserve safe access

Outdoor placement can make access less predictable than an indoor electrical room. Review the approach route, door swing, operating side, available working space, lighting, drainage, and clearance from fences, walls, vehicles, stored materials, and other equipment. The responsible design professional should verify applicable access and clearance requirements for the installation rather than relying on a generic layout. Consider how authorized personnel will reach the equipment in bad weather and whether snow, vegetation, mud, or routine site activity could obstruct the area. Coordinate locks, door hardware, labeling, and any requested access controls with the project documents. Do not place the assembly where servicing would depend on moving unrelated equipment or entering an unsafe area. The enclosure arrangement, access provisions, and installation location should be reviewed together, because a weather-appropriate cabinet can still be impractical if the site prevents suitable approach or operation.

Verify the complete specification

Before requesting a quotation, gather the one-line diagram, system voltage, service conditions, required ratings, utility or facility requirements, environmental details, foundation information, and any project specifications. Identify which requirements are mandatory and which are preferred options, including enclosure rating, finish, heaters, controls, metering, and cable-entry arrangement. Ask the supplier to identify assumptions or open items rather than treating an incomplete description as confirmed suitability. For applicable low-voltage switchboard assemblies, UL 891 requirements may be relevant; confirm applicability and required documentation for the specific project. This standard does not apply to medium- or high-voltage switchgear. Switchgear Builder Virginia supplies new custom switchboards manufactured in the USA with all-American components. Lead times and ratings are subject to quotation and verification, so confirm the proposed configuration, drawings, and schedule against the project documents before placing an order.

Related project guides

START A CONVERSATION

Let’s build the right solution.

Tell us what you’re building, replacing or upgrading. Share the information you have now; project details and availability can be confirmed together.

PREFER TO TALK?

(951) 403-5738

Virginia projects. Nationwide delivery.

This attempts to open a draft in your configured email app; review and send it there. Browser support varies. For immediate assistance, call (951) 403-5738.

Request a quote